Here’s the bill of materials (BOM) for the latest version of the Multiboard. The Mouser part numbers are included for reference:
[table]
PART,VALUE, QUANTITY,MOUSER PART #
Resistor, 220Ω 1/4W 1%, 42, 660-MF1/4DCT52R2200F
Resistor, 10kΩ 1/4W 1%, 41, 660-MF1/4DCT52A1002F
Resistor, 3.3kΩ 1/4W 1%, 8, 660-MF1/4DC3301F
Resistor, 1kΩ 1/4W 1%, 3, 660-MF1/4DCT52A1001F
Resistor, 100Ω 1/4W 1%, 1, 660-MF1/4DC1000F
Resistor, 2.2kΩ 1/4W 1%, 1,660-MF1/4DC2201F
Resistor, 1MΩ 1/4W 1%, 1, 660-MF1/4DCT52A1004F
Resistor, 3.9kΩ 1/4W 1%, 1, 660-MF1/4DCT52R3901F
Diode, 1N4148, 1, 512-1N4148
Diode, 1N4001, 1, 512-1N4001
XTAL, 16MHz, 1, 815-ABL-16-B2
IC – Optocoupler, 6N137, 1, 757-6N137F
IC – Multiplexer, CD4051BE, 1, 595-CD4051BE
IC – Shift Register, 74HC595, 5, 595-SN74HC595N
IC – Shift Register, CD4021BE, 5, 595-CD4021BE
IC – Voltage Regulator, LM7805, 1, 512-LM7805CT
IC – DAC, MCP4901, 1, 579-MCP4901-E/P
IC – Amp, LM386, 1, 926-LM386N-4/NOPB
IC – EEPROM, 24LC256, 1, 579-24LC256-I/P
IC – MCU, Atmega 328P-PU, 1, 556-ATMEGA328P-PU
Header (Right Angle), 6pin dual breakaway ICSP, 1, 571-826955-3
1/8″ Mini jack, Phone Connector 3.5mm, 1, 502-35RAPC4BHN2
1/4″ Jack, supplied with PCB, 1,
DIP Socket, 28p, 1, 571-1-390262-2
DIP Socket, 8p, 3, 571-1825093-2
Tactile Switches, 12mm, 40, 612-TL1100
Switch Caps, Black, 24, 642-AKTS22K
Switch Caps, Ivory, 14, AKTSC22I (Apem) – not stocked by Mouser
Switch Caps, Blue, 2, AKTSC22B (Apem) – not stocked by Mouser
Ceramic Disk Capacitor, 0.1uF (104), 16, 140-50V5-104Z-RC
Ceramic Disk Capacitor, 0.001uF (102), 8, 594-H102K25X7RL63J5R
Ceramic Disk Capacitor, 22pF (22), 2, 140-50N5-220J-RC
Header, single breakaway 40p, 1, 571-41033210
Ceramic Capacitor, 4.7nF, 1, 810-FK18X7R2A472K
DC Power Connector, 9v 2.1mm, 1, 163-179PH-EX
Capacitor, 100uF 16v, 6, 871-B41827A4107M000
Capacitor, 10uF 16v, 3, 871-B41002A4106M000
Trimmer Resistor, 10kΩ, 1, 72-T93XA-10K
MIDI Connectors, 5-pin DIN, 2, 161-0504-E
Potentiometers, 10k linear, 6, 688-RK09K1130AAU
Knobs, 16mm D-Shaft, 6, 450-BA761
LEDs, red 3mm, 40, 604-WP710A10ID5V
LED standoffs, 6mm, 40, 593-STD250B
[/table]
Download the BOM as a PDF: Groovesizer MB BOM – March 2014

Please note: we’ve selected components as close to the ones we supply as possible, but many of the items have not been ordered from Mouser by us before. If you find a part listed here that’s not correct, please let us know so we can correct it on the BOM.