Successful build RED :)

Home Discussions Your Build Successful build RED :)

This topic contains 1 reply, has 2 voices, and was last updated by  moshang 2 years, 10 months ago.

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #2427



    Last week I soldered the Groovesizer RED, and it worked perfectly from first moment šŸ™‚
    It took me about 2 hours without housing plates. Everything without problems, just one of the hex spacers needs long time to fit (bad thread).
    Maybe it’s easier to solder the LEDs first before soldering the resistor networks, but its manageable.

    The Groovesizer RED works very fine with Korg Volca Keys (check MIDI channel if it doesn’t work immediately).
    Synth-audio sounds good to me, with a lot more interesting noise and dirt than I thought an Arduino 8-Bit Sound would sound. But clear, beepy sounds are also possible.

    So I need more time to play around with this litte thing…



    Awesome Rumo,

    Good to know you had no problems with the build. I hope you continue to have fun with your RED.

Viewing 2 posts - 1 through 2 (of 2 total)

You must be logged in to reply to this topic.