Moshang mentions in the firmware upload options you can do it using an usb asp. But didnt got it to work with his cheap chinese one.
Well I got it to work with this cheap chinese usbasp.
Its an atmega 8 based usbasp.
I do had to update the firmware
I used arduino 1.06 with avrdude 6.1 on ubuntu.
I made a fitting cable, changing firmware is a breeze now.
The cable was to long at first and gave me problems made it 15 cm now its al fine.
Hope it helpes somebody
This topic was modified 2 years, 2 months ago by wybren.