Due clone – midi Home › Discussions › TB2 › Due clone – midi This topic contains 5 replies, has 2 voices, and was last updated by moshang 1 year, 3 months ago. Viewing 6 posts - 1 through 6 (of 6 total) Author Posts April 7, 2016 at 7:44 am #3691 JustinParticipant Has anyone had any luck getting the midi functions to work with a Due Clone? April 7, 2016 at 3:19 pm #3692 moshangKeymaster Heya Justin, MIDI in and out both work fine here with the clone boards. What trouble are you having? April 8, 2016 at 9:24 am #3693 JustinParticipant Hi Moshang, Thanks for the reply! I’m not receiving or sending any midi messages. I’ve checked the soldering – looks and tests Ok. Also I tried using another clone Due (that’s why I thought it might be the issue). No sure as to why at this point. April 8, 2016 at 9:29 pm #3697 moshangKeymaster Are you on the attack or quartet firmware? What is your current process for testing? To test midi out from tb2, I usually check with midiOX on pc. Could it be a channel mismatch? This reply was modified 1 year, 3 months ago by moshang. April 9, 2016 at 9:55 am #3698 JustinParticipant Hi Moshang, I’ve worked it out! The cable I’m using is labelled in correctly. For testing/playing I use Hermann Seib program VST Host. Thanks for the help! Cheers April 9, 2016 at 10:03 am #3699 moshangKeymaster Ok, great that you have it working! Author Posts Viewing 6 posts - 1 through 6 (of 6 total) You must be logged in to reply to this topic.